BMS
A Building Management System (BMS) gives facility teams one central platform to monitor and control the key services operating inside a building. Instead of checking HVAC equipment, meters, sensors and other systems separately, relevant information can be brought together through a single management interface.
AZTÖR Automation designs BMS solutions for commercial buildings, hotels, residential towers, hospitals, schools, warehouses, factories and mixed-use developments across the UAE.
HVAC is commonly at the heart of a BMS. Fan coil units, AHUs, ventilation systems, pumps, temperature controls and compatible VRF/VRV equipment can be monitored or controlled through DDC controllers, gateways and manufacturer-supported interfaces.
A well-designed BMS is also valuable for day-to-day facility management. Operators can view temperatures, equipment status, alarms and other available operating data without physically checking every plant room or controller.
Alarm management helps teams identify conditions that need attention. Depending on the connected equipment, the BMS can report faults, abnormal sensor readings, communication failures and other configured events.
Historical trends are equally useful. Temperature, equipment status, energy data and other points can be recorded over time, helping facility teams investigate recurring problems and understand how the building is actually operating.
Energy meters and Smart Metering can also be integrated. This allows electricity or other compatible utility data to be viewed alongside HVAC and building operations, supporting a wider Energy Management strategy.
AZTÖR works with established building communication technologies including BACnet, Modbus and KNX, together with DALI and manufacturer-specific gateways where required. The final architecture depends on the equipment already installed and the level of integration required.
Existing BMS installations do not always need complete replacement. Controllers, field devices, networks, graphics and supervisory systems can be assessed to determine whether practical integration, migration or phased upgrades are possible.
AZTÖR provides BMS design, DDC controls, system integration, graphics, programming, commissioning, troubleshooting, retrofit and maintenance across Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah, Fujairah and Umm Al Quwain, with free site inspection and suitable GCC project support.
Key Features
- Centralised Building Monitoring
- HVAC Monitoring & Control
- FCU Control
- AHU Control
- Ventilation System Integration
- Pump Monitoring & Control
- Smart Thermostat Integration
- Temperature Monitoring
- Humidity Monitoring
- CO₂ Monitoring
- Indoor Air Quality Integration
- DDC Control
- Equipment Status Monitoring
- Alarm Management
- Fault Notifications
- Historical Trending
- Data Logging
- Operating Schedules
- Multi-Zone Control
- Energy Monitoring
- Smart Metering Integration
- Energy Management Integration
- BACnet Integration
- Modbus Integration
- KNX Integration
- DALI Integration
- Central BMS Graphics
- Remote Monitoring
- Existing BMS Upgrades
- BMS Troubleshooting & Maintenance
Technical Specification
| Solution Type | Building Management System |
|---|---|
| Application | Commercial / Residential / Hospitality / Industrial |
| System Architecture | Centralised / Distributed / Hybrid |
| Supervisory Platform | Project & Manufacturer Specific |
| Field Controllers | DDC / PLC / Application Specific |
| HVAC Integration | Available |
| FCU Integration | Available |
| AHU Integration | Available |
| Ventilation Integration | Available |
| Pump Integration | Available |
| VRF / VRV Integration | Manufacturer Interface Specific |
| Temperature Sensors | Available |
| Humidity Sensors | Available |
| CO₂ Sensors | Available on Suitable Systems |
| Air Quality Sensors | Available on Suitable Systems |
| Occupancy Integration | Available |
| Energy Meter Integration | Available |
| Water Meter Integration | Available on Compatible Systems |
| Digital Inputs | Controller Specific |
| Digital Outputs | Controller Specific |
| Analogue Inputs | Controller Specific |
| Analogue Outputs | Controller Specific |
| Control Logic | Project Specific |
| Scheduling | Available |
| Alarm Management | Available |
| Alarm Priorities | Configurable |
| Historical Trending | Available |
| Data Logging | Available |
| BMS Graphics | Available |
| Dashboard | Available |
| BACnet/IP | Available on Compatible Systems |
| BACnet MS/TP | Available on Compatible Systems |
| Modbus TCP | Available |
| Modbus RTU | Available |
| KNX Integration | Through Compatible Interface |
| DALI Integration | Through Compatible Gateway |
| Third-Party Integration | Protocol / Gateway / API Specific |
| Remote Monitoring | Available on Connected Systems |
| User Management | Role-Based, Platform Specific |
| Multi-Building Monitoring | Available on Suitable Platforms |
| Installation Type | New Installation / Retrofit / BMS Upgrade |
BMS design should begin with the actual equipment and control requirements of the building. HVAC sequences, controllers, sensors, electrical meters, communication protocols, network architecture and third-party interfaces should be verified before integration. For existing systems, AZTÖR Automation can assess what can be retained, integrated or upgraded before recommending a complete BMS replacement. A free site inspection is available for initial assessment.
Typical Applications
- Commercial Buildings
- Office Towers
- Corporate Offices
- Hotels & Resorts
- Residential Towers
- Mixed-Use Developments
- Shopping Malls
- Retail Developments
- Hospitals & Healthcare Facilities
- Schools & Universities
- Warehouses
- Logistics Centres
- Factories
- Manufacturing Facilities
- Industrial Buildings
- Data Centres
- Government Buildings
- Facility Management Projects
- Building Retrofit Projects
- Smart Building Developments
