GI Rolling Shutters Dubai & UAE

GI Rolling Shutters

GI rolling shutters are practical steel closure systems widely used for commercial, industrial and service entrances where security, durability and straightforward operation are important. The shutter curtain rolls vertically around a barrel above the opening, keeping the sides of the entrance clear when the shutter is open.

AZTÖR supplies and installs custom-sized GI rolling shutters for shops, warehouses, factories, workshops, loading areas, service entrances, storage facilities and other commercial or industrial properties across the UAE.

The shutter curtain is manufactured from interlocking galvanized steel profiles selected according to the opening dimensions and application. Galvanizing provides corrosion protection to the steel, while the final slat profile, thickness, guides, bottom rail, barrel and support arrangement are selected according to the required shutter size and operating conditions.

A reliable rolling shutter is more than the curtain itself. The complete assembly includes the barrel or shaft, brackets, bearings, side guides, bottom rail, locking arrangement and, where automated, a correctly selected motor and control system. These components need to work together for smooth and dependable operation.

AZTÖR carries out a free site inspection for applicable rolling shutter requirements. We measure the structural opening, available headroom and side room, assess the fixing surfaces, operating frequency and access requirement, and confirm whether manual, chain-operated or motorised operation is appropriate.

Motorised GI rolling shutters can be equipped with a suitable tubular, side-mounted, central or industrial shutter operator depending on shutter construction, dimensions, weight and duty requirement. Larger or frequently operated shutters require appropriately engineered drive systems rather than simply fitting a higher-powered motor to a standard shutter.

Control options can include push buttons, key switches, remote controls and suitable access-control interfaces. Depending on the application, compatible photocells, safety edges, warning devices or other safety components can also be incorporated into the shutter system.

For warehouses and industrial sites, operating frequency is an important part of motor selection. A shutter used only a few times each day has a different duty requirement from a busy service entrance operating repeatedly throughout a working shift.

AZTÖR can also automate suitable existing manual GI shutters. Before conversion, the curtain, guides, barrel, bearings, brackets and overall mechanical condition are inspected because automation should not be used to compensate for a shutter that is already difficult or unsafe to operate manually.

Existing GI rolling shutters can often be repaired instead of completely replaced. AZTÖR provides troubleshooting and repair for damaged slats, guide problems, shutter alignment, bottom rails, bearings, shafts, motors, limit settings, control panels, push buttons, receivers and other serviceable components.

Where individual curtain sections are damaged, affected slats may be replaceable subject to the profile type and overall shutter condition. More extensive distortion, corrosion or structural damage may make curtain or complete shutter replacement the more reliable option.

For external UAE installations, the shutter specification should consider exposure to heat, dust, sand, humidity and, where relevant, wind. Larger external shutters require particular attention to curtain construction, guide retention, supporting structure and project-specific wind requirements.

GI rolling shutters can be supplied with suitable finishes according to project requirements. The final appearance, coating system and available colour options depend on the selected shutter specification and manufacturer or fabrication process.

Standard GI rolling shutters should not automatically be described as fire-rated, smoke-rated, wind-rated or security-rated. Where a project requires a specific tested performance classification, an appropriately tested and documented complete shutter system must be selected for that requirement.

AZTÖR provides GI rolling shutter supply, installation, motorisation, repair and preventive maintenance across Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah, Fujairah and Umm Al Quwain, with suitable industrial door support available across the wider GCC.

Key Features

Galvanized steel shutter construction
Custom-made to suit structural opening
Interlocking GI shutter profiles
Commercial and industrial applications
Manual operation options
Chain operation where applicable
Motorised rolling shutter options
Tubular motor options for suitable shutters
Side-mounted motor options
Industrial shutter operator options
Heavy-duty configurations where required
Vertical space-saving operation
Clear entrance when fully open
Galvanized corrosion-resistant steel
Robust side guide channels
Heavy-duty bottom rail options
Suitable barrel and shaft assembly
Bearing and bracket system
Push-button operation
Key-switch control options
Remote-control options
Access-control integration where compatible
Photocell integration where required
Safety edge options for compatible systems
Manual emergency operation according to selected motor
Existing shutter motorisation
Damaged slat replacement where practical
Guide and alignment repair
Motor and gearbox replacement
Limit adjustment and troubleshooting
Control-panel repair and replacement
Preventive maintenance and AMC support
Custom finish options
UAE commercial and industrial applications

Technical Specification

Product Type	Galvanized iron rolling shutter
Material	Galvanized steel
Curtain Construction	Interlocking shutter profiles
Slat Profile	Selected according to opening and application
Material Thickness	Project and profile specific
Opening Size	Custom manufactured to site dimensions
Operation	Manual, chain-operated or motorised
Motor Type	Tubular, central, side-mounted or industrial operator as applicable
Motor Capacity	Selected according to shutter weight, dimensions and duty
Duty Cycle	According to selected motor and operating frequency
Barrel / Shaft	Sized according to shutter construction and opening
Side Guides	Galvanized steel or project-specific guide arrangement
Bottom Rail	Reinforced profile according to shutter design
Brackets	Selected according to shutter load and supporting structure
Bearings	Suitable for shaft and operating load
Control	Push button, key switch, remote or compatible access control
Remote Control	Available with compatible motor and receiver
Limit Control	Motor or operator specific
Safety Photocells	Available where required and compatible
Safety Edge	Available on suitable motorised configurations
Manual Override	According to selected operator
Power Supply	According to selected motor and project electrical provision
Finish	Galvanized, coated or project-specific finish
Colour	Subject to selected coating system and availability
External Application	Specification selected according to site exposure
Wind Requirement	Project specific; engineered where required
Fire Rating	Only where a separately tested and certified fire-rated system is specified
Installation	New installation, replacement or suitable existing-shutter motorisation
Maintenance	Curtain, guides, shaft, bearings, motor and controls service available

GI rolling shutters are manufactured according to the actual opening, operating frequency and site conditions. Slat profile and thickness, guide size, barrel, brackets, motor capacity and safety accessories should not be selected from opening width alone. AZTÖR carries out a free site inspection to measure the opening and assess structural fixing, shutter duty and operating requirements before confirming the final specification. Any required fire, wind or other tested performance classification must be specified separately and supported by the relevant product documentation.

Typical Applications

Retail shops
Shopfront entrances
Shopping centres
Commercial units
Warehouses
Storage facilities
Factories
Manufacturing facilities
Industrial units
Workshops
Logistics centres
Distribution centres
Loading areas
Service entrances
Back-of-house entrances
Commercial kitchens
Building service areas
Car parks
Basement entrances
Vehicle entrances
Staff entrances
Equipment rooms
Utility areas
Plant rooms
Commercial compounds
Industrial compounds
Garages
Storage rooms
Existing shutter replacements
Existing manual shutter automation

Frequently Asked Questions

A GI rolling shutter is a vertically operating closure manufactured using interlocking galvanized steel profiles that roll around a barrel above the opening.

GI commonly refers to galvanized iron or galvanized steel used for the shutter curtain and related components. The zinc-coated surface helps protect the underlying steel against corrosion.

They are widely used for shops, warehouses, workshops, factories, storage facilities, service entrances and other commercial or industrial openings.

Yes. AZTÖR provides a free site inspection for applicable rolling shutter requirements to measure the opening and assess the fixing, operating frequency and required shutter configuration.

Yes. Rolling shutters are normally manufactured according to the actual structural opening, available headroom, side space and project requirements.

Yes, subject to engineering and site conditions. Larger openings require appropriate curtain profiles, guides, barrel, supports and motor selection rather than simply scaling up a small shutter design.

There is no single correct thickness for every shutter. Material thickness and profile should be selected according to opening dimensions, shutter construction, operating conditions and required performance.

Yes. They are commonly used for warehouse entrances, internal service openings, loading areas and other industrial applications where the selected specification suits the opening.

Yes. GI shutters are widely used to secure retail and commercial shopfronts outside operating hours.

Yes. Suitable shutters can be motorised using an operator selected according to the curtain weight, dimensions, shaft arrangement and required duty.

Depending on the shutter, a tubular, central, side-mounted or industrial shutter operator may be appropriate. Motor selection should be based on the complete shutter rather than only the opening size.

Often, yes. AZTÖR first checks the curtain, guides, barrel, bearings, brackets and mechanical resistance to determine whether the existing shutter is suitable for motorisation.

Yes. A compatible radio receiver and remote controls can be integrated with suitable motorised shutter systems.

Yes. Push-button control is commonly used for motorised rolling shutters, particularly in commercial and industrial applications.

Yes. A suitable key switch can be used where controlled local operation is preferred.

Compatible access-control systems can provide an authorised command to suitable shutter controllers, subject to the required operating and safety logic.

Yes. Suitable photocells can be incorporated where required to detect presence or obstruction according to the shutter control design.

Compatible motorised shutters can use an appropriate safety edge where required by the system design.

The response depends on the selected operator. Suitable motors may provide a manual emergency operation or another project-specific means of operation during a power failure.

Galvanizing improves corrosion resistance but does not make steel permanently immune to corrosion. Exposure, coating condition, damage and maintenance all affect long-term performance.

Yes, when appropriately specified. External shutters should be selected with consideration for heat, dust, sand, humidity and the particular exposure of the building.

Yes. Wind pressure can place substantial loads on large external shutters. Curtain profile, guides, retention, supporting structure and project-specific wind requirements should therefore be considered.

No. A normal GI shutter should not be represented as fire rated. Where fire performance is required, a specifically tested and documented fire-rated shutter system must be selected.

A standard shutter should not simply be modified and then described as fire rated. Fire performance relates to a tested complete system and its documented installation configuration.

Yes, where compatible profiles are available and the remaining curtain is in serviceable condition. Extensive damage may require a larger curtain replacement.

Common causes include damaged or misaligned slats, guide obstruction, worn bearings, shaft problems, motor faults, incorrect limits or physical distortion.

Uneven movement can result from curtain misalignment, guide problems, shaft or bearing issues, damaged profiles or other mechanical faults that should be inspected before further operation.

Possible causes include gearbox, drive, shaft, coupling or curtain problems. The complete drive and mechanical system should be diagnosed.

Incorrect limit settings, mechanical resistance, motor protection, controller faults or damaged shutter components can cause incomplete travel.

Yes, where the curtain, shaft, guides and supporting components remain suitable and a correctly sized compatible replacement operator can be installed.

Yes. AZTÖR can inspect and repair suitable third-party rolling shutters subject to their condition and availability of compatible components.

Yes. Maintenance can cover the curtain, guides, brackets, bearings, shaft, motor, limits, controls and safety accessories according to the agreed scope.

AZTÖR provides GI rolling shutter installation, motorisation, repair and maintenance across Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah, Fujairah and Umm Al Quwain, with suitable support across the wider GCC.

Get a quote for GI Rolling Shutters

Send us the opening dimensions or book a free inspection — we will come back with a specification and a price.

Request a Quote

Industrial Door Systems

Downloads

Need this specified?