Swing Gates
Swing gates provide a traditional and practical solution for controlling vehicle access to villas, residential compounds, commercial properties and secured facilities. One or two gate leaves rotate around side-mounted hinges, creating an entrance that can be designed around the architecture and appearance of the property.
Automatic swing gates are especially popular at UAE villas and residential developments because the automation equipment can be installed discreetly while retaining the appearance of the entrance. They are also used at offices, schools, hotels, staff accommodation, commercial compounds and selected industrial sites.
A swing gate needs sufficient clear space for the leaves to travel safely through their complete opening arc. Before recommending automation, AZTÖR provides a free site inspection to check the entrance width, individual leaf dimensions and weight, hinge condition, gate posts, opening direction, driveway slope, wind exposure, vehicle movement, operating frequency and available power supply.
Depending on the gate construction and site geometry, automation can use articulated-arm, linear, underground or other suitable swing gate operators. Underground operators are often considered where architectural appearance is important, while above-ground operators can provide a practical and serviceable solution for many residential and commercial entrances.
Motor selection should be based on the individual gate leaf rather than simply the overall entrance width. Leaf length and weight, hinge geometry, wind resistance, required opening angle, daily operating frequency and mechanical condition all influence the force required from the automation system.
AZTÖR works with established swing gate automation manufacturers including FAAC, CAME, BFT, Nice, Benincà and other suitable brands available for UAE and GCC projects. The operator and control system are selected around the actual gate rather than using one standard motor for every entrance.
Automatic swing gates can operate through remote transmitters, push buttons, keypads, card readers, biometric readers, intercoms and compatible smart-access systems. Residential communities and commercial sites can also integrate suitable UHF vehicle identification, ANPR or other authorised vehicle-access systems where required.
Safety is particularly important because each gate leaf creates a moving sweep area. Depending on the entrance and risk assessment, photocells, safety edges, obstacle detection, warning lights and other protective devices can be incorporated. Vehicle stopping positions and pedestrian movement around the gate should also be considered during system design.
Existing manual swing gates can often be automated if the leaves, hinges, posts and foundations remain structurally suitable and the gates move freely. AZTÖR also repairs existing automatic systems, including motors, arms, underground operators, control boards, photocells, remotes, locks and mechanical gate problems.
AZTÖR provides swing gate supply, automation, installation, repair and preventive maintenance across Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah, Fujairah and Umm Al Quwain, with suitable residential, commercial and industrial gate projects supported across the wider GCC.
Key Features
- Single-leaf and double-leaf swing gates
- Manual and automatic configurations
- Residential, commercial and industrial applications
- Linear swing gate operators
- Articulated-arm gate operators
- Underground automation options
- Suitable existing-gate automation
- Adjustable opening and closing parameters
- Individual control of double gate leaves
- Remote control operation
- Push-button operation
- Keypad and card reader integration
- Biometric access integration
- Intercom and video intercom integration
- UHF vehicle access integration
- ANPR integration where required
- Compatible smart and GSM access options
- Safety photocell integration
- Safety edge options where required
- Obstacle detection according to selected operator
- Warning light integration
- Electric gate lock integration where required
- Manual emergency release
- Preventive maintenance and breakdown repair
Technical Specification
| Gate Type | Swing vehicle access gate |
|---|---|
| Configuration | Single-leaf or double-leaf |
| Operation | Manual or automatic |
| Gate Construction | Steel, aluminium or project-specific construction |
| Opening Direction | Inward or outward subject to site geometry |
| Drive System | Electromechanical, hydraulic or manufacturer-specific swing gate operator |
| Operator Type | Linear, articulated arm, underground or suitable project-specific operator |
| Motor Capacity | Selected according to individual leaf length, weight and geometry |
| Opening Angle | According to gate geometry and selected operator |
| Duty Cycle | Residential, commercial or industrial according to selected system |
| Power Supply | According to selected operator and project electrical provision |
| Control | Remote, push button, keypad, access control or authorised system |
| Safety Photocells | Available according to entrance safety requirements |
| Safety Edges | Available where required |
| Obstacle Detection | According to selected operator and safety configuration |
| Warning Light | Available where specified |
| Electric Lock | Available where required by gate dimensions or system design |
| Manual Release | Emergency manual release on compatible operators |
| Access Control | Card, biometric, keypad, intercom or compatible third-party system |
| Vehicle Identification | UHF, ANPR or compatible vehicle-access system where required |
| Gate Position Monitoring | Available where supported |
| Finish | Powder-coated, galvanised or project-specific gate finish |
| Installation | New gate, existing-gate automation or automation replacement |
| Maintenance | Motors, arms, hinges, controls, sensors and mechanical adjustment available |
Swing gate automation must be selected according to each gate leaf's length, weight, construction, hinge geometry, opening angle, wind exposure and operating frequency. AZTÖR confirms the appropriate operator, mounting arrangement, controls and safety devices after a free site inspection. Existing gates should be mechanically sound and move correctly before automation is installed.
Typical Applications
- Private villas
- Luxury residences
- Residential compounds
- Gated communities
- Apartment developments
- Townhouse communities
- Commercial buildings
- Corporate offices
- Hotels and resorts
- Schools and universities
- Hospitals and healthcare facilities
- Government properties
- Staff accommodation
- Warehouses
- Industrial compounds
- Factories
- Vehicle yards
- Private car parks
- Service entrances
- Security entrances
- Controlled vehicle access points
