Automatic Sliding Gates Dubai & UAE

Sliding Gates

Sliding gates provide secure vehicle access without requiring the large inward or outward opening area needed by swing gates. The gate leaf travels horizontally along the boundary, making this configuration particularly practical for properties where driveway depth is limited or where vehicle movement needs to remain clear.

Across the UAE, sliding gates are widely used at villas, residential communities, warehouses, factories, logistics facilities, commercial compounds, staff accommodation and controlled vehicle entrances. Systems can be designed for new developments or existing entrances that require replacement, automation or upgrading.

The gate itself must be mechanically sound before automation is considered. AZTÖR's free site inspection checks the clear opening, gate dimensions and estimated weight, construction, track or cantilever arrangement, available run-back space, ground level, structural supports, expected operating frequency, wind exposure and power availability.

Tracked sliding gates run on wheels along a properly installed ground track and are a common solution for level entrances. Cantilever sliding gates operate without a track across the driveway opening and can be useful where a ground track would be impractical. The appropriate arrangement depends on the entrance, gate weight, supporting structure and site conditions.

For automatic operation, the motor is selected according to much more than gate width alone. Gate weight, daily cycle frequency, mechanical resistance, wind loading, required opening speed and operating environment all influence motor selection. A correctly sized operator should move a properly balanced gate rather than compensate for a gate that is difficult to move mechanically.

AZTÖR works with established gate automation manufacturers such as FAAC, CAME, BFT, Nice, Benincà and other suitable brands available for UAE and GCC projects. Depending on the requirement, operators can be selected for residential, commercial or heavier-duty industrial applications.

Automatic sliding gates can be controlled through remote transmitters, keypads, card readers, biometric systems, intercoms, GSM or authorised smart-access systems. For vehicle facilities, compatible solutions can also integrate with UHF readers, ANPR systems, loop detectors and other controlled-access technologies.

Safety should be designed into the complete gate rather than added after installation. Depending on the entrance, safety photocells, edges, obstacle detection, warning lights, emergency release and other protective devices can be incorporated to reduce risks around the moving gate.

AZTÖR also repairs and modernises existing sliding gates. Common problems include damaged motors, worn pinions or racks, control-board faults, photocell problems, damaged tracks, worn wheels, poor alignment, remote-control issues and gates that have become mechanically difficult to move.

AZTÖR provides sliding gate supply, automation, installation, repair and preventive maintenance across Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah, Fujairah and Umm Al Quwain, with suitable gate automation project support available across the wider GCC.

Key Features

Manual and automatic sliding gate configurations
Tracked sliding gate systems
Cantilever sliding gate options
Residential, commercial and industrial applications
Heavy-duty gate automation options
Rack-and-pinion drive systems
Remote control operation
Keypad and card reader integration
Biometric access integration
Intercom and video intercom integration
UHF vehicle access integration
ANPR integration where required
GSM and compatible smart-access options
Safety photocell integration
Safety edge options
Obstacle detection according to selected operator
Warning light integration
Manual emergency release
Access-control and building-system interfaces
New installation and existing-gate automation
Motor and control-system replacement
Preventive maintenance and breakdown repair

Technical Specification

Gate Type	Sliding vehicle access gate
Configuration	Tracked or cantilever sliding
Operation	Manual or automatic
Gate Construction	Steel, aluminium or project-specific construction
Drive System	Electromechanical or suitable industrial sliding gate operator
Transmission	Rack-and-pinion or manufacturer-specific drive system
Motor Capacity	Selected according to gate weight, dimensions and operating frequency
Duty Cycle	Residential, commercial or industrial according to selected operator
Power Supply	According to selected motor and project electrical provision
Control	Remote, push button, keypad, access control or authorised system
Safety Photocells	Available and recommended according to entrance risk assessment
Safety Edges	Available where required
Obstacle Detection	According to selected operator and safety configuration
Warning Light	Available where specified
Manual Release	Emergency manual release provided on compatible operators
Access Control	Card, biometric, keypad, intercom or compatible third-party system
Vehicle Identification	UHF, ANPR or compatible vehicle-access system where required
Loop Detector	Available for suitable vehicle detection applications
Gate Position	Open and closed status monitoring where supported
Finish	Powder-coated, galvanised or project-specific gate finish
Installation	New gate, existing-gate automation or automation replacement
Maintenance	Motor, rack, wheels, track, sensors and control-system servicing available

Sliding gate motors must be selected according to actual gate weight, construction, mechanical condition, daily operating frequency, wind exposure and site environment. AZTÖR confirms the motor, rack, control board and required safety devices after a free site inspection. Existing gates must move correctly by hand before automation is used to provide reliable powered operation.

Typical Applications

Private villas
Residential compounds
Gated communities
Apartment developments
Commercial buildings
Office compounds
Warehouses
Logistics centres
Factories
Manufacturing plants
Industrial facilities
Staff accommodation
Schools and universities
Hotels and resorts
Hospitals and healthcare facilities
Government facilities
Car parks
Vehicle yards
Distribution centres
Service entrances
Controlled vehicle access points

Frequently Asked Questions

A sliding gate moves horizontally along the property boundary rather than swinging into or out of the driveway. It is commonly used where driveway space needs to remain clear.

Yes. AZTÖR provides a free site inspection for applicable sliding gate requirements to check the opening, gate size and weight, run-back space, track, structure, traffic, power supply and automation requirements.

Depending on the gate and application, AZTÖR works with established automation manufacturers such as FAAC, CAME, BFT, Nice, Benincà and other suitable brands available in the UAE and GCC.

Motor selection depends on gate weight, dimensions, mechanical resistance, daily operating frequency, environmental exposure and required functionality. Selecting a motor only by gate width can result in an unsuitable installation.

A tracked gate travels on wheels over a ground track across the entrance. A cantilever gate is supported from the side and does not require a track across the driveway. The best solution depends on the site and gate construction.

Usually, if the existing gate is structurally sound and moves smoothly. We inspect the wheels, track, alignment, supporting structure, available motor position and gate weight before recommending automation.

Yes. Remote transmitters are commonly used, and the system can also support other compatible activation and access-control methods.

Yes. Depending on the selected control system, GSM or compatible smart-access solutions can allow authorised gate operation through a mobile device.

Yes. Automatic sliding gates can integrate with card readers, biometric readers, keypads, intercoms and other authorised access-control devices.

Yes. UHF long-range readers can be integrated for suitable residential, staff, commercial and fleet-access applications so authorised vehicles can be identified automatically.

Yes. A suitable ANPR system can be configured to trigger authorised gate access based on recognised vehicle number plates, subject to the access-control design and applicable requirements.

The appropriate safety arrangement depends on the gate and site. Photocells, safety edges, obstacle detection, warning lights and other devices may be required to protect the gate's movement and closing areas.

Compatible operators include a manual release so the gate can be disengaged and moved when necessary. Battery or backup-power solutions may also be available depending on the selected system.

Possible causes include damaged rack or pinion components, mechanical obstruction, worn wheels, motor or gearbox problems, gate misalignment or control issues. The gate should be inspected rather than repeatedly operating the motor.

Yes. AZTÖR can diagnose many existing gate systems regardless of the original installer, subject to the condition of the equipment and availability of compatible spare parts.

Yes, in many cases. If the gate, track, wheels and structure remain serviceable, the existing operator and controls can be replaced or modernised without replacing the complete gate.

Yes. Maintenance can cover the motor, gearbox, rack, wheels, track, control board, photocells, safety devices, remotes and gate alignment according to the agreed scope.

AZTÖR provides sliding gate installation, automation, repair and maintenance across Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah, Fujairah and Umm Al Quwain, with suitable project support across the wider GCC.

Get a quote for Sliding Gates

Send us the opening dimensions or book a free inspection — we will come back with a specification and a price.

Request a Quote

Gate Automation

Downloads

Need this specified?